A&E24 Renovations
KitchensBathroomsCabinetsPortfolioBlogAboutContact
Smart Renovation Decisions

How to Compare Two Remodeling Quotes That Look Completely Different

November 18, 2026 · A&E24 Renovations
How to Compare Two Remodeling Quotes That Look Completely Different

To compare remodeling quotes that look completely different, put them on the same footing before you look at the totals: list every item each quote includes, note what each one leaves out, and check whether the materials are named or just covered by an allowance. Once the scopes match, the price gap usually shrinks or explains itself. The bottom line on a quote tells you very little until you know exactly what it buys.

Here is a simple, step-by-step way to line up two bids side by side, and the questions to ask when they still do not match.

Why do remodeling quotes vary so much?

Two remodelers can look at the same kitchen and write quotes that differ by tens of thousands of dollars. That is rarely random. The difference almost always comes from one of these:

  • Different scope. One quote includes the backsplash, drywall repair, and paint; the other does not.
  • Different materials. One prices a specific quartz and plywood cabinets; the other uses a low allowance and particleboard.
  • Different assumptions. One expects the plumbing to stay put; the other has planned to move the sink.
  • Different business models. A lean quote may plan to recover margin through change orders later.

Your job is not to pick the cheaper number. It is to figure out which of those four explains the gap.

How do you put two quotes side by side?

The easiest tool is a simple table, on paper or in a spreadsheet. Down the left side, list every part of the project. Across the top, one column per quote. Then go line by line:

  • Demolition and disposal
  • Cabinets (brand, construction, finish)
  • Countertops (material, edge, sink cutout)
  • Backsplash and wall tile
  • Flooring and transitions
  • Plumbing fixtures and their installation
  • Lighting and electrical changes
  • Drywall repair, trim, and paint
  • Permits and inspections
  • Cleanup and final walkthrough

Mark each cell as included, excluded, or unclear. Most homeowners are surprised by how many cells end up blank or unclear on the lower quote. For a full kitchen remodel, this one exercise often explains most of the difference.

What are allowances, and why do they matter?

An allowance is a dollar figure that stands in for a decision you have not made yet, like “tile allowance: $X” or “fixtures allowance: $X.” Allowances are not bad on their own, but they are where quotes become hard to compare and easy to grow.

Check each allowance against what you actually want. If the counter allowance would only cover an entry-level slab and you have been looking at quartzite, the real cost of that quote is higher than it looks. Before comparing, ask each remodeler to price the same named products, or at least the same grade. On countertops and stone, especially, the material choice can swing the number more than anything else on the page.

What should every quote clearly state?

A complete, comparable quote should spell out:

  • A written scope of work, room by room.
  • Named materials or clearly defined grades.
  • What is excluded, in writing.
  • How hidden problems found behind walls or under floors are handled and priced.
  • The payment schedule, tied to progress rather than dates.
  • Insurance information and how workmanship is backed after completion.
  • An estimated start date and duration.

If one quote is a single page with a total and the other is five pages of detail, the detailed one is not necessarily more expensive. It may simply be more honest about the cost.

How should you compare change-order risk?

This is the part most people miss. A quote is a starting price unless it says otherwise. Ask each remodeler directly: “Under what circumstances would this price change?” Then listen carefully.

Some will say the price is fixed for the written scope, and only changes if you ask for something new. Others will describe a long list of conditions. A lower quote with a high chance of change orders can easily end up costing more than a higher, fixed one. We explain what a true fixed price looks like in our post on what “fixed price before demo” really means.

What questions should you ask when the numbers still do not match?

Once the scopes are lined up, if one quote is still much higher, ask each remodeler to walk you through it. Good questions include:

  • “What is the biggest single cost in your number?”
  • “What did you see in my home that affected the price?”
  • “What are you assuming about what is behind the walls?”
  • “Who will actually be on site each day, and who do I call with questions?”
  • “What happens if the project runs long?”

The answers tell you as much about how the job will go as the numbers do. A remodeler who explains clearly before you sign tends to communicate clearly during the work.

Are there local factors that affect quotes in Southwest Florida?

Yes. Condo buildings may require specific insurance, work hours, elevator reservations, and association approval, which add time and coordination. Gated communities often require outside companies to be registered before they arrive. Work that moves plumbing, electrical, or walls usually needs a permit, and those go through the City of Naples, Collier County, the Village of Estero, or Lee County depending on your address. A quote that ignores those realities is not really cheaper; it just has not counted them yet. If you are comparing bids for a remodel in Estero or a Naples condo, ask each remodeler how they have accounted for your building’s rules.

A brief word on our own approach, since this guide is meant to help you compare anyone’s quotes. At A&E 24 Renovations, owners Enmanuel and Ashley visit your home, make the selections with you, and then give one fixed price and written scope before any work begins. If that approach sounds right for you, our page on a fixed-price, owner-led remodel walks through how it works.

Frequently asked questions

Should I always choose the lowest remodeling quote?
Not automatically. The lowest quote often leaves out items or relies on low allowances. Compare scopes line by line first, then compare the totals.
How many remodeling quotes should I get?
Two or three is usually enough to understand the market, as long as each one is based on the same scope and similar materials.
What is an allowance in a remodeling quote?
An allowance is a dollar amount set aside for an item not yet chosen, like tile or fixtures. If your final choice costs more than the allowance, the price goes up, so check each allowance against what you actually want.
What is the biggest red flag in a remodeling quote?
A single total with no written scope, no named materials, and no explanation of what is excluded. That leaves the real price undecided until the work is underway.

Whichever quote you choose, we hope this makes the decision clearer and calmer — that is the real point of writing it. A&E24 Renovations is Enmanuel and Ashley, a small family team based in Naples. If you would like a second set of eyes on two quotes that do not add up, you are welcome to reach out any time, no pressure either way.

← Back to the blog